← All use cases

Search, Rescue & Mapping

In development

More ground covered. Fewer flight passes.

Wide-area thermal coverage for search, rescue, and mapping. Give every pass a broader view of the ground below.

Contact Us
Actual in-flight thermal imagery captured with the 18 mm sensor configuration.
33×

More Ground Observed

33× more ground area visible per complete scan than a single nadir frame.

7×

Wider Coverage

7× the width of a conventional nadir-only image.

12+

Perspectives Every Second

High-resolution, multi-angle thermal captures, ready for geospatial mapping and AI analysis.

Coverage and width comparison uses the same sensor, lens, and altitude.

The wider-pass advantage

Wide-angle sweeps cover
dramatically more ground per flight pass.

A conventional downward-looking thermal camera sees a narrow strip. HotSweep sweeps a wide circle beneath the aircraft. As it flies forward, overlapping sweeps build a continuous thermal map with fewer passes.

Real capture · one revolution · FLIR Boson 640×512 · 18 mm lens · 95 m AGL drone 95 m AGL 283 m across ≈3 football fields end to end · same scale
7×Wider than the same sensor and lens pointing down
4×Wider than a fixed sensor at the same viewing angle
≈3Football fields across
283 mWidth covered in one sweep

The mission-time advantage · Benchmark

Cover more ground
in the same flight time.

In a coverage benchmark, HotSweep covered 438 acres in a 40-minute flight. Conventional downward-looking capture needs 240.5 minutes for the same area, including battery swaps.

Total elapsed mission time · 438 acres · 60 m AGL · shorter is better

6.01×Faster elapsed mission time
200.5 minMission time saved
5.39×Coverage rate · 10.94 vs 2.03 ac/min

Product-team benchmark at 60 m above ground for 438 acres. Conventional lawnmower capture includes battery-swap downtime. Results vary by aircraft, site and flight conditions.

Applications

Put more ground in every mission.

Start with what you need to see. Let’s find the right fit for your team and environment.

Search & rescue

Search wider ground for heat signatures on each flight pass.

Thermal mapping

Build a thermal picture of land and roofs from overlapping sweeps as the aircraft moves.

Airframe integration

Explore payload integration with DJI aircraft or open-source flight stacks for your mission.

Early stage · Now partnering

Build the next view with us.

HotSweep is an early-stage system, and we’re actively looking for partnerships and product integrations. Contact us to request a demo, explore a product, or discuss an integration.